Home > Product > MTP MPO Cable Assembly > MTP MPO LC Cassette Module
Full Loaded MTP MPO to LC Fiber Optic Cassette Designed for 100G Migration Ethernet and Fiber Channel Ethernet

Full Loaded MTP MPO to LC Fiber Optic Cassette Designed for 100G Migration Ethernet and Fiber Channel Ethernet

Description

Technical Information:
ALTEK's MTP Cassette Modules are fitted with 24 Fibers and have LC adapters on the front side and MTP® at the rear. This cassette is made into smaller size and can be deployed in an ODF for higher density main distribution area (MDA) to the equipment distribution area (EDA) in the data center.


Basic characteristics:
 ► High density;
 ► Compact size;
 ► Quick and easy installation;
 ► Reduce installation time and cost;
 ► Available with 12 fiber and 24 fiber configurations for SC, LC connectors;
 ► Standard and customized made are available.


Details:

Fiber Count

24

Fiber Type

OS2 9/125μm SMF

Front Connector Type

12 LC Duplex

Rear Connector Type

2 MTP® Male

MTP Adapter

Key up to Key down

Performance Level

Laser optimized

Insertion Loss

MTP≤0.35dB,LC≤0.3dB

Return Loss

MTP≥60dB,LC≥50dB

RoHS Compliance

Applicability

Dimension(HxWxD)

1.38''x4.29''x4.64''(35x109x118mm)

Operating
Temperature

0℃ to +70℃
(-32˚F to 158˚F)

Storage and
Shipping Temperature

-40℃ to +75℃
(-40˚F to 167˚F)


Specification:
MPO/MTP® Cassettes with LC or SC connectors have optimized optical performances: a maximum Insertion Loss of 1.3 dB per cassette and a minimum Return Loss of 20 dB(Multimode), 55dB (Single mode) per cassette. Each cassette is small in size. On the back side of the cassette are one or two 12-fiber MPO adapters. On the front side of the cassette may be 12 SC simplex ports or 6, 12 LC Duplex ports. 

產品介紹及圖片整理說明1428.png

 
Application:
 ► Data Centre Infrastructure;
 ► Storage Area Network- Fibre Channel;
 ► Parallel Optics;
 ► Infiniband;
 ► Emerging 40 and 100Gbps Protocols.


General Connector Specification:

Parameter

Single-mode

Multi-mode

 

 

Basic

Fiber connector

FC, SC, LC, ST, MU, MTRJ, MPO

Ferrule End-face

PC

UPC

APC

UPC

Insertion Loss

≤0.2dB

≤0.2dB

≤0.3dB

≤0.3bB

Return Loss

≥50dB

≥55dB

≥60dB

≥35dB

Ceramic Ferrule Specification

125.5um concentricity deviations:
     <=1um

127um concentricity deviations:<=3um

Suitable Fiber

9/125um

50/125um,62.5/125um

 

End-face Geometry

Radius of Curvature

7~25mm

5~12mm

N/A

Fiber Protrusion

≤50nm

≤100nm

N/A

Fiber Under Cut

≤100nm

≤100nm

N/A

Apex offset

≤50um

Mechanical

Exchangeability

≤0.2dB

Salt Spray

≤0.1dB

Drop

≤0.2dB(1.5M, 5 drops)

Vibration

IL ≤0.2dB(550Hz, 1.5mm)

Repeatability

≤ 0.1dB(1000 times)

Durability

> 1000 times

Operating Temperature

-40℃ ~ +85℃

 

The basic division of MTP® connectors:

Type and Color
Code Connectors

Insertion
Loss (IL)

Optical
Return Loss (RL)

Operating
Temperature

Single-mode MTP® Elite® Connector

0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Single-mode MTP® Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Multimode MTP® Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3

> 20 dB (0°Flat Polished)2,3

-40℃ to 75℃

1 IL test according to IEC 61300-3-4;
2 RL test according to IEC 61300-3-6;
3 Tested with proposed encircled flux launch condition on 50μm fiber & 850nm per IEC 61280-4-1.

 

High Density MTP®/MPO Cabling System In Dada Center:



Ordering Guide:

Product Description

MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A
         1                  2               3         4       5             6               7        8       9

1 - Connector A

MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish;
MTP/M/PC: MTP Male,PC polish; MTP/M/APC: MTP Male,APC polish;

2 - Connector B

LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC;
SC/UPC/DX;SC/APC/DX;SC/UPC/SX;SC/APC/SX;FC/UPC;FC/APC;ST/UPC

3 - Fiber Mode

OM1, OM2, OM3, OM4, OS2, G657A1

4 - Fiber Count&Type

12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable

5 - Fanout Type

B2.0: 2.0 fan-out with splitter kit.

6 - Length

1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc.

7 - Cable Jacket Materials

LSZH,OFNP,OFNR,PVC

8 - Cable Jacket Color

Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM).

9 - Polarity

A: Type A; B: Type B; C: Type C.


If the full loaded mtp mpo to lc fiber optic cassette designed for 100g migration ethernet and fiber channel ethernet caters to your requirement, welcome to wholesale the high-end and quality products from our factory. As one of the leading manufacturers and suppliers in China, we can assure you of its high quality and competitive price. And the customized service is also available.

Feedback

We're Here to Help

  • 86-755-29423879
    86-755-29423879
    Sales@telesfiber.com
    10/F,Jintian Industry Mansion,Xitian Second Indusrial Park,Gongming office,Guangming New District,Shenzhen,China

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!