Home > Product > MTP MPO Cable Assembly > MTP MPO Fanout Cable Assembly
12 Cores Fiber Optic Single Mode MPO MTP SC 0.9mm Fan Out Kit Cable Assembly Connection

12 Cores Fiber Optic Single Mode MPO MTP SC 0.9mm Fan Out Kit Cable Assembly Connection

Description

Technical Information:
The single-mode and multimode MPO products are multi-fiber connectors used in high-density backplane and Printed Circuit Board(PCB) applications in data and telecommunications system. The MPO connector offers up to 12 times the density of standard connectors, providing significant space and cost savings. MPO patch cord utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO can be mass terminated in combination of 4,8,12 or 24 fibers. MTP®/MPO multi-fiber trunk cables are usually in mini-round cables and ribbon cables, with fanout kits broken down into 2~24 fiber 0.9mm or 2.0mm tails with connector LC, SC, ST, FC, etc. Cable total length, fanout length, connector type are customized.


Features:
 ► 4, 6, 8 and 12-fiber count available;
 ► Save duct space and installation time;
 ► 900um, or 2mm fan-out tube;
 ► Easy to use;
 ► Jacketed ribbon cables, bare ribbons, or distribution cables.


Application:
 ► Data Communication;
 ► Telecommunication;
 ► Long haul networks;
 ► CATV networks;
 ► Building interconnections. 

图片1.png

 

Specifications and Dimensions:

Characteristics

Unit

Value/Performance

Fiber Count

-

4, 6, 8 or 12

Cable Type

-

Bare ribbon, jacket ribbon or distribution cable

Optical Performance

-

See corresponding patch cord data sheets

Fan-out Diameter

-

900um

2mm

Operating Temperature

0 ~ +70°C

-20 ~ +70°C

Storage Temperature

-5 ~ +70°C

-40 ~ +70°C

Tensile strength

kg

>2.5kg

>6.8kg


Parameter

Single-mode

Multi-mode

 

 

Basic

Fiber connector

FC, SC, LC, ST, MU, MTRJ, MPO

Ferrule End-face

PC

UPC

APC

UPC

Insertion Loss

≤0.2dB

≤0.2dB

≤0.3dB

≤0.3bB

Return Loss

≥50dB

≥55dB

≥60dB

≥35dB

Ceramic Ferrule Specification

125.5um concentricity deviations:
     <=1um

127um concentricity deviations:<=3um

Suitable Fiber

9/125um

50/125um,62.5/125um

 

End-face Geometry

Radius of Curvature

7~25mm

5~12mm

N/A

Fiber Protrusion

≤50nm

≤100nm

N/A

Fiber Under Cut

≤100nm

≤100nm

N/A

Apex offset

≤50um


The Basic Division of MTP&reg; Connectors:

Type and Color
     Code Connectors

Insertion
Loss (IL)

Optical
Return Loss (RL)

Operating
Temperature

Single-mode MTP&reg; Elite&reg; Connector

0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Single-mode MTP&reg; Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Multimode MTP&reg; Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3

> 20 dB (0°Flat Polished)2,3

-40℃ to 75℃

1 IL test according to IEC 61300-3-4;
2 RL test according to IEC 61300-3-6;
3 Tested with proposed encircled flux launch condition on 50μm fiber & 850nm per IEC 61280-4-1.

 

Recommended buffer fiber and color-coded connectors:

Cable Type

Single-mode MTP&reg; Elite&reg;
     Connector

Single-mode MTP&reg; Standard
     Connector

Multimode MTP&reg; Elite&reg;
     Connector

Multimode MTP&reg; Standard
     Connector

Bare Ribbon

1.png


 

2.png 

3.png 

4.png 

Flat ribbon Cordage

Cable Ø 2.0mm

Cable Ø 3.0mm

Cable Ø 3.6mm

Cable Ø 4.5mm

Cable Ø 5.0mm

Cable Ø 5.5mm


Typical Applications and Wire Map:

图片3.png

 

Ordering Information:


     Product Description

MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A
         1                 2               3         4       5                  6           7         8        9

1 - Connector A

MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish;
MTP/M/PC: MTP Male,PC polish; MTP/M/APC: MTP Male,APC polish;

2 - Connector B

LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC;
SC/UPC/DX;SC/APC/DX;SC/UPC/SX;SC/APC/SX;FC/UPC;FC/APC;ST/UPC

3 - Fiber Mode

OM1, OM2, OM3, OM4, OS2, G657A1

4 - Fiber Count&Type

12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable

5 - Breakout Type

B2.0: 2.0 fan-out with splitter kit.

6 - Length

1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc.

7 - Cable Jacket Materials

LSZH/OFNP/OFNR

8 - Cable Jacket Color

Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM).

9 - Polarity

A: Type A; B: Type B; C: Type C.


If the 12 cores fiber optic single mode mpo mtp sc 0.9mm fan out kit cable assembly connection caters to your requirement, welcome to wholesale the high-end and quality products from our factory. As one of the leading manufacturers and suppliers in China, we can assure you of its high quality and competitive price. And the customized service is also available.

Feedback

We're Here to Help

  • 86-755-29423879
    86-755-29423879
    Sales@telesfiber.com
    10/F,Jintian Industry Mansion,Xitian Second Indusrial Park,Gongming office,Guangming New District,Shenzhen,China

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!