● General Description:
This 10Gigabit XFP BiDi transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km. The 10G XFP BiDi 20km optical module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.
● Quick Specs:
► High-speed storage area networks;
► Computer cluster cross-connect;
► Custom high-speed data pipes;
► Line side loop back.
● Quick Details:
► Hot-Pluggable XFP Optical Transceiver with LC connector;
► 10G Small Form-Factor Pluggable (XFP) MSA compatible;
► Compliant with XFP Multi-Sourcing Agreement (MSA);
► INF-8077i Digital Diagnostic Function (DMI);
► Maximum Link Length of 80KM;
► Support both +3.3V and +5V Power Supply;
► Low Power Dissipation < 3 Watts;
► RoHS Compliant;
► Class 1 Laser International Safety Standard IEC 60825 Compliant.
► SONET(OC-192)/SDH(STM64) line card;
► 10GBASE-ER (10.3125Gbps);
► 10GBASE-EW (9.953Gbps);
► 10GE Ethernet switches and routers;
► 10GE Storage.
Width: 13 mm
+5 V, +3.3 V
-5℃ to 70℃
-40℃ to 85℃
IEC-60825, FDA 21
● Optical characteristics transceiver:
Maximum Launch Power
Optical Center Wavelength
Optical Extinction Ratio
Sidemode Supression ratio
Rise/Fall Time (20%~80%)
Optical Eye Mask
Operating Date Rate
Maximum Input Power
Optical Center Wavelength
● Quality Certification:
Quality and standards are the foundation of ALTEK. We are dedicated to providing customers with outstanding, standards-compliant products and services. ALTEK has passed many quality system Certifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
● Lifetime Warranty:
All the fiber optic products in ALTEK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
Bi-directional 10Gbps XFP transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification. They comply with 10-Gigabit Ethernet 10GBASE-LR/LW per IEEE 802.3ae, SONET OC-192 /SDH and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA.
If the 10gbase-bx smf 1330nm-tx/1270nm-rx 20km dom lc wdm bidi xfp transceiver module cisco xfp-10g-bx20d-i compatible caters to your requirement, welcome to wholesale the high-end and quality products from our factory. As one of the leading manufacturers and suppliers in China, we can assure you of its high quality and competitive price. And the customized service is also available.
We're Here to Help